1. Features of Shandong Shancai/Laizhou Laihua Test Instruments fully automatic metallographic cutting machine:
The metallographic sample cutting machine uses a high-speed rotating thin grinding wheel to cut metallographic samples. It is suitable for cutting various metal materials in metallographic laboratories.
The cutting machines shipped by our company have undergone strict quality control and testing and can operate stably for a long time. Manual cutting and automatic cutting can be freely selected according to the workpiece.
It has good safety performance and is equipped with safety protection devices and emergency stop buttons to ensure the safety of operators.
Large visual cutting observation window enables real-time control of cutting operations
The fully automatic metallographic sample cutting machine is simple to operate. You only need to set the cutting parameters and press the start button to start cutting without manual intervention.
2. Precautions when sampling with metallographic cutting machine:
When sampling, it should be ensured that the structure of the material does not undergo any changes, and the size of the sample should be appropriate. The cut surface should be as smooth and flat as possible, and as free of burrs as possible. When removing the specimen from the cutting equipment, be sure not to get burned. When intercepting the specimen, care should be taken to protect the special surface of the specimen. Pay attention to safety when operating equipment
3. Please know before purchasing a metallographic cutting machine:
Choose the appropriate cutting disc. Select the material, hardness, cutting speed, etc. of the cutting blade according to the material and hardness of the workpiece to be cut.
Choose an appropriate fixture to secure the workpiece. Improper clamp selection may damage the cutting piece or sample.
Choose a suitable high-efficiency coolant, and ensure that the coolant is not expired and has sufficient balance when cutting. If you have any selection questions, please feel free to contact us.
4. How to use the automatic metallographic cutting machine Q-100B:
Turn on the power switch;
Rotary emergency stop button
Open the upper cover
Remove the screws, install the cutting disc, and tighten the screws
Fix the specimen in the clamp and clamp the specimen
Choose manual or automatic cutting mode
Turn the handwheel of the cutting chamber and bring the grinding wheel close to the sample
In automatic cutting mode, press the start button to cut the sample
In manual cutting mode, rotate the handwheel and use manual feed to cut.
The cooling system will automatically start to cool the sample
After cutting the sample, the cutting motor stops cutting. At this time, the stepper motor starts and automatically returns to the starting position.
Post time: May-13-2024
